mirror of
https://github.com/Anime4000/RTL960x.git
synced 2024-07-03 12:39:24 +00:00
87 lines
3.0 KiB
Markdown
87 lines
3.0 KiB
Markdown
# Hacking RTL9601C1
|
|
Hacking V2801F & TWCGPON657 to suite your ISP Fiber
|
|
|
|
# Issue
|
|
GPON market is a mess, plus explicit OMCI cause ONU Stick did not work
|
|
|
|
With my issue:
|
|
* [V2801F](https://www.amazon.com/Universal-Stick-Address-Supported-Attention/dp/B08C818JSQ) build quality is bad, died from overheating, firmware is good, manage to have an internet!
|
|
* [TWCGPON657](https://item.taobao.com/item.htm?spm=a1z09.2.0.0.c0552e8d7UBYLF&id=597031866488) build quality is good, firmware is bad, CPU usage become 100% when PLOAM Password is set!
|
|
|
|
My goal is, Good Firmware (V2801F) + Good Hardware (TWCGPON657) = Ultimate XPON ONU STICK!
|
|
|
|
# Flash
|
|
I have been using TWCGPON657 (without fan) for a month and never had an issue, so in this sections, flash V2801F firmware into TWCGPON657 stick and fix auto-reboot issue.
|
|
|
|
## Steps:
|
|
* Downgrade your TWCGPON657 to version B13 or below.
|
|
* Flash with `V2801F_V1.9.0-201104.tar` and wait.
|
|
* Quickly login and execute `echo 3 > /proc/fiber_mode` to avoid auto-reboot (invalid `VS_AUTH_KEY`)
|
|
* Disconnect fiber from module to restore telnet
|
|
* Update `VS_AUTH_KEY` acording to `ELAN_MAC_ADDR` and `HW_HWVER`
|
|
* Reboot (in telnet)
|
|
* Reflash again with `V2801F_V1.9.0-201104.tar` (must do after fix `VS_AUTH_KEY`)
|
|
* Enjoy!
|
|
|
|
# Auto Reboot Fix
|
|
## V2801F
|
|
### Issue
|
|
* Invalid `VS_AUTH_KEY`
|
|
* Changing MAC Address `ELAN_MAC_ADDR` can cause wrong `VS_AUTH_KEY` value
|
|
|
|
### Fix
|
|
* You need to generate new `VS_AUTH_KEY` when change `ELAN_MAC_ADDR` and `HW_HWVER`
|
|
* Apperently, you have few seconds to access Telnet before rebooting
|
|
* To prevent auto reboot by entering `echo 3 > /proc/fiber_mode` (XPON Ethernet Mode)
|
|
|
|
> If you can't type fast enough, use this autoit script `quick_telnet-login.au3`.
|
|
>
|
|
> Take a look some generated [`VS_AUTH_KEY` here](Docs/VS_AUTH_KEY.md)
|
|
|
|
### Note
|
|
When `echo 3 > /proc/fiber_mode` is set, you lose telnet acccess, you need to unplug fiber to get back
|
|
|
|
## TWCGPON657
|
|
* No such problem, `VS_AUTH_KEY` does not exist.
|
|
|
|
# Usage
|
|
* Please read [FLASH_GETSET_INFO.md](Docs/FLASH_GETSET_INFO.md) for how to configure, login, etc...
|
|
* Advance setting like duplicate ONT Info, read [FLASH_GETSET_DEV.md](Docs/FLASH_GETSET_DEV.md)
|
|
* For a manual for the built-in Realtek `diag` utility, see: [RTKPONDiagShellUserGuide](Docs/RTKPONDiagShellUserGuideV001.291982779.pdf)
|
|
* Source: https://usermanual.wiki/Pdf/RTKPONDiagShellUserGuideV001.291982779/html
|
|
|
|
# Modify
|
|
You need a Linux PC/VM, Ubuntu as Operating System
|
|
|
|
## Prerequisite
|
|
You need these program installed:
|
|
* `tar` (extract tar package)
|
|
* `squashfs-tools` (extract/repack rootfs)
|
|
* `qemu-user-static` (run MIPS VM)
|
|
|
|
## Extract firmware
|
|
* Extract Firmware package in `tar` format, we need `rootfs` file
|
|
* Extract `rootfs` partition
|
|
```
|
|
unsquashfs rootfs
|
|
```
|
|
|
|
## Repack firmware
|
|
* Repack `rootfs`
|
|
```
|
|
mksquashfs squashfs-root rootfs.new -b 131072 -comp lzma
|
|
```
|
|
* Rename `rootfs`
|
|
```
|
|
mv rootfs rootfs.old
|
|
mv rootfs.new rootfs
|
|
```
|
|
* Update `md5sum`
|
|
```
|
|
md5sum fwu.sh rootfs uImage fwu_ver > md5.txt
|
|
```
|
|
* tar current folder
|
|
```
|
|
tar -cvf ../firmware.tar *
|
|
```
|