mirror of
https://github.com/Anime4000/RTL960x.git
synced 2024-07-03 12:39:24 +00:00
116 lines
4.1 KiB
Markdown
116 lines
4.1 KiB
Markdown
# Hacking RTL9601C1
|
||
Hacking V2801F & TWCGPON657 to suite your ISP Fiber
|
||
|
||
# Issue
|
||
GPON market is a mess, plus explicit OMCI cause ONU Stick did not work
|
||
|
||
## With my issue:
|
||
* [V2801F](https://www.amazon.com/Universal-Stick-Address-Supported-Attention/dp/B08C818JSQ)
|
||
* Support OMCI explicit provision LAN port on 2/3/4...
|
||
* Support OMCI explicit provision **override** `OMCI_FAKE_OK 1`
|
||
* Good Firmware, support many ISP (Global)
|
||
* Build not strudy
|
||
* [TWCGPON657](https://item.taobao.com/item.htm?spm=a1z09.2.0.0.c0552e8d7UBYLF&id=597031866488)
|
||
* Not Working OMCI explicit provision LAN port on 2/3/4...
|
||
* Not Working OMCI explicit provision **override**
|
||
* Bad Firmware, limited ISP support
|
||
* Silm & Tight build
|
||
|
||
## Single Fiber, Multiple ISP Problem
|
||
**Fiber Provider can carry Multiple ISP by provision different LAN Port ONU, example:**
|
||
|ONU SFP ⬇️ / Huawei HG8240H LAN Port ➡️ | 1️⃣ | 2️⃣ | 3️⃣ | 4️⃣ |
|
||
|------------------------|-------|-------|-------|-------|
|
||
|DFP-34G-2C2 (ZTE) |:heavy_check_mark:|:x:|:x:|:x:|
|
||
|DFP-34X-2C2 (ZTE) |:heavy_check_mark:|:x:|:x:|:x:|
|
||
|TWCGPON657 |:heavy_check_mark:|:x:|:x:|:x:|
|
||
|V2801F |:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|
|
||
|
||
> :heavy_check_mark: = Can Bridge
|
||
>
|
||
> :x: = Cannot Bridge (No Internet)
|
||
|
||
* V2801F firmware can automatically bridge everyting!
|
||
* If your ISP on LAN 2 ONU, V2801F firmware can bridge it with **no** settings!
|
||
* Most GPON ONU Stick like DFP-34X-2C2 cannot bridge *ONU LAN Port 2 - 4 for Other ISP*
|
||
|
||
## My Goal Is,
|
||
Good Firmware (V2801F) + Good Hardware (TWCGPON657) = Ultimate XPON ONU STICK!
|
||
|
||
# Flash
|
||
I have been using TWCGPON657 (without fan) for a month and never had an issue, so in this sections, flash V2801F firmware into TWCGPON657 stick and fix auto-reboot issue.
|
||
|
||
## Steps:
|
||
* Downgrade your TWCGPON657 to version B13 or below.
|
||
* Flash with `V2801F_V1.9.0-201104.tar` and wait.
|
||
* Quickly login and execute `echo 3 > /proc/fiber_mode` to avoid auto-reboot (invalid `VS_AUTH_KEY`)
|
||
* Disconnect fiber from module to restore telnet
|
||
* Update `VS_AUTH_KEY` acording to `ELAN_MAC_ADDR` and `HW_HWVER`
|
||
* Reboot (in telnet)
|
||
* Reflash again with `V2801F_V1.9.0-201104.tar` (must do after fix `VS_AUTH_KEY`)
|
||
* Enjoy!
|
||
|
||
# Auto Reboot Fix
|
||
## V2801F
|
||
### Issue
|
||
* Invalid `VS_AUTH_KEY`
|
||
* Changing MAC Address `ELAN_MAC_ADDR` can cause wrong `VS_AUTH_KEY` value
|
||
|
||
### Fix
|
||
* You need to generate new `VS_AUTH_KEY` when change `ELAN_MAC_ADDR` and `HW_HWVER`
|
||
* Apperently, you have few seconds to access Telnet before rebooting
|
||
* To prevent auto reboot by entering `echo 3 > /proc/fiber_mode` (XPON Ethernet Mode)
|
||
|
||
> If you can't type fast enough, use this autoit script `quick_telnet-login.au3`.
|
||
>
|
||
> Take a look some generated [`VS_AUTH_KEY` here](Docs/VS_AUTH_KEY.md)
|
||
|
||
### Note
|
||
When `echo 3 > /proc/fiber_mode` is set, you lose telnet acccess, you need to unplug fiber to get back
|
||
|
||
## TWCGPON657
|
||
* No such problem, `VS_AUTH_KEY` does not exist.
|
||
|
||
# Usage
|
||
* Please read [FLASH_GETSET_INFO.md](Docs/FLASH_GETSET_INFO.md) for how to configure, login, etc...
|
||
* Advance setting like duplicate ONT Info, read [FLASH_GETSET_DEV.md](Docs/FLASH_GETSET_DEV.md)
|
||
* For a manual for the built-in Realtek `diag` utility, see: [RTKPONDiagShellUserGuide](Docs/RTKPONDiagShellUserGuideV001.291982779.pdf)
|
||
* Source: https://usermanual.wiki/Pdf/RTKPONDiagShellUserGuideV001.291982779/html
|
||
|
||
# Downgrade
|
||
If V2801F firmware not supported on TWCGPON657, you can downgrade via this url: `http://192.168.1.1/upgrade.asp`
|
||
|
||
# Modify
|
||
You need a Linux PC/VM, Ubuntu as Operating System
|
||
|
||
## Prerequisite
|
||
You need these program installed:
|
||
* `tar` (extract tar package)
|
||
* `squashfs-tools` (extract/repack rootfs)
|
||
* `qemu-user-static` (run MIPS VM)
|
||
|
||
## Extract firmware
|
||
* Extract Firmware package in `tar` format, we need `rootfs` file
|
||
* Extract `rootfs` partition
|
||
```
|
||
unsquashfs rootfs
|
||
```
|
||
|
||
## Repack firmware
|
||
* Repack `rootfs`
|
||
```
|
||
mksquashfs squashfs-root rootfs.new -b 131072 -comp lzma
|
||
```
|
||
* Rename `rootfs`
|
||
```
|
||
mv rootfs rootfs.old
|
||
mv rootfs.new rootfs
|
||
```
|
||
* Update `md5sum`
|
||
```
|
||
md5sum fwu.sh rootfs uImage fwu_ver > md5.txt
|
||
```
|
||
* tar current folder
|
||
```
|
||
tar -cvf ../firmware.tar *
|
||
```
|