1.4 KiB

Raw Blame History

OMCI MIB (Management Information Base)

Enter these command in telnet, omcicli is a binary file (/bin/omcicli) to check or set MIB

Print All

Make sure you set your putty or Terminal to save output log, copy these and paste it

for ME in 00002 00005 00006 00007 00011 00024 00045 00047 00049 00050 00052 00078 00079 00083 00084 00089 00130 00131 \
00133 00134 00136 00137 00148 00157 00158 00171 00240 00244 00245 00248 00249 00250 00253 00255 00256 00257 00262 00263 \
00264 00266 00267 00268 00272 00273 00274 00277 00278 00280 00281 00284 00287 00296 00298 00307 00308 00309 00310 00311 \
00312 00321 00322 00329 00330 00334 00340 00341 65282 65294 65408 65527 65528 65529 65530 65531 74; do echo -e "\n\nMIB:" \
$ME"\n\n";omcicli mib get $ME; done;

Important

Verify Circuit Pack

omcicli mib get 6

Verify software version

omcicli mib get 7

Ethernet Provisioning (VEIP)

omcicli mib get 11

Verify VLAN Tag Filter

omcicli mib get 84

This allow to see PON VLAN and ETH VLAN

Verify OLT vendor ID

omcicli mib get 131

Extended VLAN config

omcicli mib get 171

This allow to see VLAN mapping either 1:1 or 1:any

Verify ONT attributes part 1

omcicli mib get 256

Verify ONT attributes part 2

omcicli mib get 257

Check T-CONT

omcicli mib get 262

Unig ? (VEIP)

omcicli mib get 264

Check Priority Queues

omcicli mib get 277

VEIP

omcicli mib get 329

1.4 KiB Raw Blame History