mirror of
https://github.com/Anime4000/RTL960x.git
synced 2024-07-01 11:59:23 +00:00
Update README.md
This commit is contained in:
parent
16bf516388
commit
80ecc58d57
25
README.md
25
README.md
|
@ -5,16 +5,23 @@ Hacking V2801F & TWCGPON657 to suite your ISP Fiber
|
|||
GPON market is a mess, plus explicit OMCI cause ONU Stick did not work
|
||||
|
||||
With my issue:
|
||||
* V2801F build quality is bad, died from overheating, firmware is good, manage to have an internet connection
|
||||
* TWCGPON657 build quality is good, firmware is bad, CPU usage become 100% when PLOAM Password is set
|
||||
* [V2801F](https://www.amazon.com/Universal-Stick-Address-Supported-Attention/dp/B08C818JSQ) build quality is bad, died from overheating, firmware is good, manage to have an internet!
|
||||
* [TWCGPON657](https://item.taobao.com/item.htm?spm=a1z09.2.0.0.c0552e8d7UBYLF&id=597031866488) build quality is good, firmware is bad, CPU usage become 100% when PLOAM Password is set!
|
||||
|
||||
Since we dont have source code, try mix and match binary between V2801F and TWCGPON657
|
||||
My goal is, Good Firmware (V2801F) + Good Hardware (TWCGPON657) = Ultimate XPON ONU STICK!
|
||||
|
||||
> Update:
|
||||
>
|
||||
> V2801F firmware can be used on [TWCGPON657](https://item.taobao.com/item.htm?spm=a1z09.2.0.0.c0552e8d7UBYLF&id=597031866488) stick.
|
||||
>
|
||||
> However, stick will keep rebooting due to invalid `VS_AUTH_KEY`, *read **Auto Reboot Fix** below*
|
||||
# Flash
|
||||
I have been using TWCGPON657 (without fan) for a month and never had an issue, so in this sections, flash V2801F firmware into TWCGPON657 stick and fix auto-reboot issue.
|
||||
|
||||
## Steps:
|
||||
* Downgrade your TWCGPON657 to version B13 or below.
|
||||
* Flash with `V2801F_V1.9.0-201104.tar` and wait.
|
||||
* Quickly login and execute `echo 3 > /proc/fiber_mode` to avoid auto-reboot (wrong `VS_AUTH_KEY`)
|
||||
* Disconnect fiber from module
|
||||
* Update `VS_AUTH_KEY` acording to `ELAN_MAC_ADDR` and `HW_HWVER`
|
||||
* Reboot
|
||||
* Reflash again with `V2801F_V1.9.0-201104.tar`
|
||||
* Enjoy
|
||||
|
||||
# Auto Reboot Fix
|
||||
## V2801F
|
||||
|
@ -23,7 +30,7 @@ Since we dont have source code, try mix and match binary between V2801F and TWCG
|
|||
* Changing MAC Address `ELAN_MAC_ADDR` can cause wrong `VS_AUTH_KEY` value
|
||||
|
||||
### Fix
|
||||
* You need to generate new `VS_AUTH_KEY` when change `ELAN_MAC_ADDR`
|
||||
* You need to generate new `VS_AUTH_KEY` when change `ELAN_MAC_ADDR` and `HW_HWVER`
|
||||
* Apperently, you have few seconds to access Telnet before rebooting
|
||||
* To prevent auto reboot by entering `echo 3 > /proc/fiber_mode` (XPON Ethernet Mode)
|
||||
|
||||
|
|
Loading…
Reference in New Issue
Block a user