mirror of
https://github.com/Anime4000/RTL960x.git
synced 2024-06-26 17:59:25 +00:00
Update Setup_Stick.md
This commit is contained in:
parent
75770d2135
commit
00f0ad90da
|
@ -26,10 +26,10 @@ If you using **TWCGPON657** you need enable `telnet` by enter this address:
|
|||
Here ranking from most important to least
|
||||
* Authentication
|
||||
* PLOAM / LOID
|
||||
* MAC Address <sub><sup>[*V2801F](#v2801f)</sup></sub>
|
||||
* Serial Number
|
||||
* MAC Address <sub><sup>*[V2801F](#v2801f), [DFP-34X-2C2](#dfp-34x-2c2)</sup></sub>
|
||||
* OMCI Device Info
|
||||
* Hardware Version <sub><sup>[*V2801F](#v2801f)</sup></sub>
|
||||
* Hardware Version <sub><sup>*[V2801F](#v2801f)</sup></sub>
|
||||
* Manufacture Info
|
||||
* Device Model
|
||||
* Software Version
|
||||
|
@ -40,8 +40,8 @@ It's best to clone ONU information via telnet or webgui config (backup, edit, re
|
|||
You need to login into your old ONU, most ONU will have information page where you can get:
|
||||
| Information | Flash Set Value | Example |
|
||||
|-------------|-----------------|---------|
|
||||
| MAC Address | `ELAN_MAC_ADDR` <sub><sup>[*V2801F](#v2801f)</sup></sub> | `781735000000` |
|
||||
| Hardware Version | `HW_HWVER` <sub><sup>[*V2801F](#v2801f)</sup></sub> | `BF9.A` |
|
||||
| MAC Address | `ELAN_MAC_ADDR` <sub><sup>*[V2801F](#v2801f), [DFP-34X-2C2](#dfp-34x-2c2)</sup></sub> | `781735000000` |
|
||||
| Hardware Version | `HW_HWVER` <sub><sup>*[V2801F](#v2801f)</sup></sub> | `BF9.A` |
|
||||
| Software Version | `OMCI_SW_VER1`, `OMCI_SW_VER2`, `CUSTOM_OMCI_SW_VER1`, `CUSTOM_OMCI_SW_VER2` | `V3R017C10S100` |
|
||||
| Serial Number | `GPON_SN` | `HWTC35000000` |
|
||||
| Manufacture Info | `PON_VENDOR_ID` | `HWTC` |
|
||||
|
@ -69,14 +69,19 @@ Every `flash set` require `reboot` to take effect
|
|||
```
|
||||
flash set GPON_PLOAM_PASSWD DEFAULT012
|
||||
```
|
||||
*If you using LOID, skip this or use `DEFAULT` value*
|
||||
|
||||
### PLOAM HEX
|
||||
```
|
||||
GPON_PLOAM_FORMAT 0
|
||||
GPON_PLOAM_PASSWD 44454641554C54303132
|
||||
```
|
||||
> ODI DFP-34X-2C2 Firmware `22x` or newer
|
||||
|
||||
## LOID
|
||||
```
|
||||
flash set LOID 0123456789
|
||||
flash set LOID_PASSWD 0123456789
|
||||
```
|
||||
*If you using PLOAM, skip this or use `0` value for both*
|
||||
|
||||
## ONU Serial Number
|
||||
```
|
||||
|
@ -84,7 +89,7 @@ flash set GPON_SN HWTC00000000
|
|||
```
|
||||
*Setting this require to update Vendor ID `PON_VENDOR_ID`*
|
||||
|
||||
## MAC Address <sup>[*V2801F](#v2801f)</sup>
|
||||
## MAC Address <sup>[*V2801F](#v2801f), [DFP-34X-2C2](#dfp-34x-2c2)</sup>
|
||||
```
|
||||
flash set ELAN_MAC_ADDR 000000111111
|
||||
```
|
||||
|
@ -128,8 +133,6 @@ flash set GPON_ONU_MODEL HG8240H5
|
|||
```
|
||||
flash set OMCI_SW_VER1 V5R019C00S125
|
||||
flash set OMCI_SW_VER2 V5R019C00S125
|
||||
flash set CUSTOM_OMCI_SW_VER1 V5R019C00S125
|
||||
flash set CUSTOM_OMCI_SW_VER2 V5R019C00S125
|
||||
```
|
||||
> Some Stick disallow changing, if you need correct Software Version to get auth, please enter `flash set OMCI_OLT_MODE 3`
|
||||
|
||||
|
@ -145,12 +148,12 @@ Make **SFP XPON ONU Stick** universal, some OLT have special OMCI, most common O
|
|||
|
||||
Even Nokia OLT, Huawei is most common due to "Universal ONU" deployment.
|
||||
|
||||
| OLT | `OMCI_OLT_MODE` Value |
|
||||
|--------|-----|
|
||||
| Defaut | `0` |
|
||||
| Huawei | `1` |
|
||||
| ZTE | `2` |
|
||||
| Custom | `3` |
|
||||
| OLT | `OMCI_OLT_MODE` Value | OMCI Information |
|
||||
|--------|-----------------------|------------------|
|
||||
| Defaut | `0` | Stick default info |
|
||||
| Huawei | `1` | M5671a info |
|
||||
| ZTE | `2` | ZTE info |
|
||||
| Custom | `3` | Your own info |
|
||||
|
||||
```
|
||||
flash set OMCI_OLT_MODE 0
|
||||
|
@ -191,6 +194,9 @@ If your original ONU doesnt give any **"Device Information"** page, try buy diff
|
|||
|
||||
My fiber vendor ([TM](https://unifi.com.my/)) and my ISP ([Maxis](https://www.maxis.com.my/)) doesn't care MAC Address, only PLOAM Password and Full OMCI Information, it may different, for the best option update everything.
|
||||
|
||||
# DFP-34X-2C2
|
||||
If you using `V1.0-220304` or newer firmware, changing `ELAN_MAC_ADDR` require to update `MAC_KEY`.
|
||||
|
||||
# V2801F
|
||||
When changing `ELAN_MAC_ADDR` and/or `HW_HWVER`, you are required to update `VS_AUTH_KEY` by using `VsAuthKeyGen.exe` in command prompt.
|
||||
|
||||
|
|
Loading…
Reference in New Issue
Block a user