mirror of
https://github.com/itsyourap/JioFiber-Home-Gateway.git
synced 2025-01-22 01:15:40 +00:00
18 lines
1.7 KiB
Markdown
18 lines
1.7 KiB
Markdown
# Encrypt Configuration File (Do not use this anymore)
|
|
|
|
*Disclaimer: - This is Only for educational purposes, No one is responsible for any type of damage.*
|
|
|
|
**(If you are attempting to get root or change the root password, you need to skip steps 1 to 5).**
|
|
|
|
1. Copy everything in the text configuration file (`RSTXXXXXXX_JCXXXXX.txt`) till before `config.checksum = "<some random md5 hash>"`.
|
|
2. Go to this [MD5 Hash Generator Website](https://passwordsgenerator.net/md5-hash-generator/) and paste it and leave a new line at the end. It should look like 
|
|
3. Click on Generate to get the MD5 hash. Copy it.
|
|
4. In your text configuration file (`RSTXXXXXXX_JCXXXXX.txt`) change `config.checksum = "<some random md5 hash>"` to `config.checksum = "<THE MD5 HASH YOU COPIED IN STEP 3>"`.
|
|
5. Save the file.
|
|
6. Open Terminal or Command Prompt.
|
|
7. Use this command to re-encrypt the text configuration file with your respective `server.key` :-
|
|
`openssl aes-128-cbc -kfile "<path to the key file>" -in "RSTXXXXXXX_JCXXXXX.txt" -out "RSTXXXXXXX_JCXXXXX_MODIFIED.enc"`
|
|
8. In your Router WEB-UI Page (`http://192.168.29.1`), go to `Administrator --> Maintenance`.
|
|
9. Select and restore the `RSTXXXXXXX_JCXXXXX_MODIFIED.enc` file that was generated at step 7.
|
|
10. If by any chance your router configuration file had incorrect settings, it might reset the whole configuration or also might brick the router. If your router is bricked, a hard reset might fix it. Just push the button (inside a hole) behind the router for about 30 seconds. And after it boots up, restore the original configuration file that you downloaded directly from the Router WEB-UI to get back your original settings.
|