# `O5` No Internet
This known issue with Alcatel/Nokia OLT giving fake `O5` ONU Status, OLT will hold OMCI Provisioning until correct OMCI Information

# Value to try
In this examplme, will be using Huawei HG8240H as example.

## Subscriber Identity
```
flash set GPON_PLOAM_FORMAT 1
flash set GPON_PLOAM_PASSWD DEFAULT012
```

## Device Identitiy
```
flash set GPON_ONU_MODEL HG8240H
flash set GPON_SN HWTC12345678
flash set PON_VENDOR_ID HWTC
flash set HW_HWVER BF9.A
flash set OMCI_SW_VER1 V3R017C10S100
flash set OMCI_SW_VER2 V3R017C10S100
```

## Device Capability
```
flash set OMCC_VER 128
flash set OMCI_TM_OPT 0
flash set OMCI_FAKE_OK 1
flash set OMCI_OLT_MODE 1
```

If still no luck, try `flash all` to print all then see any `OMCI_*`

## For Users using CHT FTTH In Taiwan
You can call to support center `0800-080-412` or using online chat from Hinet website to tell them "重整線路" to reset the OLT port and remove OMCI infomation lock.

## For Users using Vivo Fibra in the Vivo 1/São Paulo region
You might try setting the following values, they were copied from a stock EdgeCore GG-11000 ONU:
```
flash set OMCC_VER 160
flash set OMCI_TM_OPT 1
```
If using `DFP-34X-2C2`, one option to avoid the `OMCI_SW_VER*` override after reboot is to set the following value, as discussed [here](https://github.com/Anime4000/RTL960x/issues/30#issuecomment-1146604684):
```
flash set OMCI_OLT_MODE 21
```
The VLAN tag for the internet is not being mapped to `10` like the stock ONU, so check the output of `omcicli mib get 84` to get the tag. In my case the VLAN tag for the internet is `885`.